Cypress Suprex® Supervised Reader Extenders and Expansion Modules

Cypress Suprex® Supervised Reader Extenders. Wired SPX-1300 and Wireless Raeder Extender Models, SPX-5631, SPX-5641

Cypress Integration Solutions is a recognised leader in the design and manufacture of electronic security products and technologies. As part of its extensive ID card systems portfolio, Windmill Computing supplies Cypress products to customers in the UK, across Europe and Worldwide.

For more details and availability on Cypress Reader Extenders and Expansion Modules contact us here or purchase below.

Wired Reader Extenders

Connect readers to access control panels using existing RS-485, Ethernet, or Fiber Optic to save time & money.

Connect readers to panels in isolated locations without buying a second control panel.

SPX-1300. Twisted Pair

A member of the Reader Extender product family, the SPX-1300 allows a reader and associated door/gate hardware to be located up to 10,000 feet away from any Wiegand or MagStripe based control panel. The two conductor connection is totally supervised and secure. Includes both remote and central units.

Wireless Reader Extender Models , SPX-563, SPX-5641

The SPX-5631 and SPX-5641 Wiireless Reader Extenders.Install readers in elevators, across parking lots, railroad tracks, or in another building. Install readers without trenching or disturbing buildings with asbestos or historical significance.

Video: Suprex® Wired Supervised Reader Extender - Cypress Integration Solutions

RPT-5651-2.4 GHz - Repeater. For Line-of-sight installation issues or extra distance.

A member of the Wireless products family, the RPT-5651 works with all Cypress 2.4 Ghz wireless products. Using the Cypress Mesh technology the RPT-5651 works to extend (up to 5000 feet outdoors line of site) and redirect wireless communications. Useful for difficult installation where clear line-of-site is not available between SPX-5601 or SPX-5621 wireless bridges. Housed in weatherproof housing. The wireless connection is totally supervised and secure. AES Encryption is available.Built on Suprex Technology

For more details and availability contact us or download here

see other products in this category

Cypress Computer Systems, Inc

Downloads

PDF Download

Cypress lifetime warranty

PDF Download

SPX-1300 Manual

Reader Extenders

Wired Reader Extenders

Currency:  GBP | USD | EUR
Twisted Pair

SPX-1300: Cypress SUPREX Wired Wiegand Reader-Extender , 2-wire RS-485, (twisted pair) for single reader. Connect readers to access controllers without Wiegand distance limits, using RS-485. Typical range is 10000 ft. (3048 m), depending on environmental conditions. The Suprex is a pair of units; a Central Unit and a Remote unit. The Central Unit connects to the access control panel, and the Remote Unit connects to the Reader. The 2-wire RS-485 connection runs between the Central and Remote units. The SPX-1300 is suitable for a connection between a single reader and access controller. An expandable RS-485 Suprex is also available, which can accommodate up to 8 readers when used with Cypress EXP expansion modules. Other Suprex models are available to link readers with an access control panel over Ethernet, Fiber Optic, or Wireless connections. FEATURES: -High immunity to electrical noise under adverse conditions, such as elevator installations -Supported data interfaces: Wiegand, Wiegand keypad, Strobed, and unsupervised F/2F -Supports up to 248 bits of credential data -Supports LED and REX switch I/O -Onboard relays for door strike / gate activation -Supports 1 reader (for multi-reader applications, use SPX-7500)

SPX-1300

SPX-1300: Cypress SUPREX Wired Wiegand Reader-Extender , 2-wire RS-485, (twisted pair) for single reader. Connect readers to access controllers without Wiegand distance limits, using RS-485. Typical range is 10000 ft. (3048 m), depending on environmental conditions. The Suprex is a pair of units; a Central Unit and a Remote unit. The Central Unit connects to the access control panel, and the Remote Unit connects to the Reader. The 2-wire RS-485 connection runs between the Central and Remote units. The SPX-1300 is suitable for a connection between a single reader and access controller. An expandable RS-485 Suprex is also available, which can accommodate up to 8 readers when used with Cypress EXP expansion modules. Other Suprex models are available to link readers with an access control panel over Ethernet, Fiber Optic, or Wireless connections. FEATURES: -High immunity to electrical noise under adverse conditions, such as elevator installations -Supported data interfaces: Wiegand, Wiegand keypad, Strobed, and unsupervised F/2F -Supports up to 248 bits of credential data -Supports LED and REX switch I/O -Onboard relays for door strike / gate activation -Supports 1 reader (for multi-reader applications, use SPX-7500)

£435.56

SUPREX® Wired Wiegand Reader-Extender - RS-485 (twisted pair) communication link. Supports 4-248 bits. Includes Central and Remote units. Durable aluminum housing. Supports EXP-2000 units for additional Wiegand based doors and gates. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50′ x 3.10′ x 2.10′ (approx).

SPX-7500

SUPREX® Wired Wiegand Reader-Extender - RS-485 (twisted pair) communication link. Supports 4-248 bits. Includes Central and Remote units. Durable aluminum housing. Supports EXP-2000 units for additional Wiegand based doors and gates. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50′ x 3.10′ x 2.10′ (approx).

£474.44

Ethernet

SPX-7200: SUPREX® Wired Reader-Extender (Ethernet) communication link. Connect readers to access controllers without Wiegand distance limits, by plugging the Suprex units in routers / switches to install readers anywhere on the IP network, or connect directly with Ethernet crossover cable, up to 328 ft. (99 m). The Suprex is a pair of units; a Central Unit and a Remote unit. The Central Unit connects to the access control panel, and the Remote Unit connects to the Reader, with the IP network or crossover cable between the units. The SPX-7200 is suitable for connecting up to 8 readers when used with EXP-2000 Expansion Module Sets. Use 1 Expansion Set for each additional reader. Other Suprex models are available to link readers with an access control panel over Fiber Optic, 2-wire RS-485, or wireless connections. FEATURES: -Use with an existing network for unlimited distance between the panel and reader (and associated I/O connections) -Plug Suprex Central & Remote units into routers / switches to install readers anywhere on the network (or connect directly with Ethernet crossover cable, up to 328 ft., or 99 m) -Supported data interfaces: Wiegand, Wiegand keypad, Strobed, and unsupervised F/2F -Supports up to 248 bits of credential data -Supports LED and REX switch I/O -Onboard relays for door strike / gate activation

SPX-7200

SPX-7200: SUPREX® Wired Reader-Extender (Ethernet) communication link. Connect readers to access controllers without Wiegand distance limits, by plugging the Suprex units in routers / switches to install readers anywhere on the IP network, or connect directly with Ethernet crossover cable, up to 328 ft. (99 m). The Suprex is a pair of units; a Central Unit and a Remote unit. The Central Unit connects to the access control panel, and the Remote Unit connects to the Reader, with the IP network or crossover cable between the units. The SPX-7200 is suitable for connecting up to 8 readers when used with EXP-2000 Expansion Module Sets. Use 1 Expansion Set for each additional reader. Other Suprex models are available to link readers with an access control panel over Fiber Optic, 2-wire RS-485, or wireless connections. FEATURES: -Use with an existing network for unlimited distance between the panel and reader (and associated I/O connections) -Plug Suprex Central & Remote units into routers / switches to install readers anywhere on the network (or connect directly with Ethernet crossover cable, up to 328 ft., or 99 m) -Supported data interfaces: Wiegand, Wiegand keypad, Strobed, and unsupervised F/2F -Supports up to 248 bits of credential data -Supports LED and REX switch I/O -Onboard relays for door strike / gate activation

£1,057.78

Fiber Optic - Multi-Mode

SPX-7400: SUPREX® Wired Wiegand Reader-Extender - Fiber Optic, Multi-Mode communication link. Connect readers to access controllers without Wiegand distance limits, using multi-mode Fiber Optic cable. Typical range is 2 miles (3.21 km), depending on environmental conditions. The Suprex is a pair of units; a Central Unit and a Remote unit. The Central Unit connects to the access control panel, and the Remote Unit connects to the Reader. The multi-mode Fiber Optic connection runs between the Central and Remote units. The SPX-7400 is suitable for connecting up to 8 readers when used with EXP-2000 Expansion Module Sets. Use 1 Expansion Set for each additional reader. Other Suprex models are available to link readers with an access control panel over single-mode Fiber Optic, Ethernet, 2-wire RS-485, or Wireless connections. FEATURES: -Recommended for sites with dark fiber, or to solve environmental challenges such as excessive heat, lightning, saltwater intrusion, erosion, or corrosive environments such as industrial sites -Supported data interfaces: Wiegand, Wiegand keypad, Strobed, and unsupervised F/2F -Supports up to 248 bits of credential data -Supports LED and REX switch I/O -Onboard relays for door strike / gate activation -Fiber cable connects to Suprex units with ST style connector

SPX-7400

SPX-7400: SUPREX® Wired Wiegand Reader-Extender - Fiber Optic, Multi-Mode communication link. Connect readers to access controllers without Wiegand distance limits, using multi-mode Fiber Optic cable. Typical range is 2 miles (3.21 km), depending on environmental conditions. The Suprex is a pair of units; a Central Unit and a Remote unit. The Central Unit connects to the access control panel, and the Remote Unit connects to the Reader. The multi-mode Fiber Optic connection runs between the Central and Remote units. The SPX-7400 is suitable for connecting up to 8 readers when used with EXP-2000 Expansion Module Sets. Use 1 Expansion Set for each additional reader. Other Suprex models are available to link readers with an access control panel over single-mode Fiber Optic, Ethernet, 2-wire RS-485, or Wireless connections. FEATURES: -Recommended for sites with dark fiber, or to solve environmental challenges such as excessive heat, lightning, saltwater intrusion, erosion, or corrosive environments such as industrial sites -Supported data interfaces: Wiegand, Wiegand keypad, Strobed, and unsupervised F/2F -Supports up to 248 bits of credential data -Supports LED and REX switch I/O -Onboard relays for door strike / gate activation -Fiber cable connects to Suprex units with ST style connector

£1,174.44

Fiber Optic - Single-Mode

SUPREX® Wired Wiegand Reader Extender - Fiber Optic (Single-mode) communication link. Supports 4-248 bits. Includes Central and Remote units. Durable aluminum housing. Supports EXP-2000 units for additional Wiegand based doors and gates. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50″ x 3.10″ x 2.10″ (approx).

SPX-7410

SUPREX® Wired Wiegand Reader Extender - Fiber Optic (Single-mode) communication link. Supports 4-248 bits. Includes Central and Remote units. Durable aluminum housing. Supports EXP-2000 units for additional Wiegand based doors and gates. Requires 8 - 16 VDC. Overall dimensions of each unit: 4.50″ x 3.10″ x 2.10″ (approx).

£1,205.56

Wireless Reader Extenders

The SPX-5631 and SPX-5641 are the replacements for the SPX-5601 and SPX-5621.

Currency:  GBP | USD | EUR
2.4 GHz

Enhanced Wireless Reader Extender - wireless 2.4 GHZ - integral antenna - weatherproof IP66 rated enclosure - Channel selection and Signal Strength indicator. Includes remote and central unit - overall dimension each unit 9.25′ x 7.0′ x 2.25′(approx) - 5000 ft range - Requires 8 - 16 VDC - Supports EXP units for additional wiegand based doors and gates. (Uses Cypress proprietary and secure Suprex® wireless network) - AES Available

SPX-5631

Enhanced Wireless Reader Extender - wireless 2.4 GHZ - integral antenna - weatherproof IP66 rated enclosure - Channel selection and Signal Strength indicator. Includes remote and central unit - overall dimension each unit 9.25′ x 7.0′ x 2.25′(approx) - 5000 ft range - Requires 8 - 16 VDC - Supports EXP units for additional wiegand based doors and gates. (Uses Cypress proprietary and secure Suprex® wireless network) - AES Available

£1,134.78

2.4 GHz - Long Range

Enhanced Wireless Reader Extender - wireless 2.4 GHZ - Dipole antenna - weatherproof enclosure - Channel selection and Signal Strength indicator. - Includes remote and central unit - overall dimension each unit 9.25′ x 7.0′ x 2.25′ (approx) - 10000 ft range - Requires 8 - 16 VDC. - Supports EXP units for additional wiegand based doors and gate. (Uses Cypress proprietary and secure Suprex® wireless network) - AES Available

SPX-5641

Enhanced Wireless Reader Extender - wireless 2.4 GHZ - Dipole antenna - weatherproof enclosure - Channel selection and Signal Strength indicator. - Includes remote and central unit - overall dimension each unit 9.25′ x 7.0′ x 2.25′ (approx) - 10000 ft range - Requires 8 - 16 VDC. - Supports EXP units for additional wiegand based doors and gate. (Uses Cypress proprietary and secure Suprex® wireless network) - AES Available

£1,290.33

Wireless Repeater-2.4 GHz

Wireless Repeater - wireless 2.4 GHz - dipole antenna - weatherproof enclosure - overall dimension 6.75″ x 4.75″ x 2.25″ (approx) - Requires 8 - 16 VDC - ( Uses Cypress proprietary and secure Suprex® wireless network) Compatible with all current model 2.4 GHZ wireless products. AES Available upon request

RPT-5651

Wireless Repeater - wireless 2.4 GHz - dipole antenna - weatherproof enclosure - overall dimension 6.75″ x 4.75″ x 2.25″ (approx) - Requires 8 - 16 VDC - ( Uses Cypress proprietary and secure Suprex® wireless network) Compatible with all current model 2.4 GHZ wireless products. AES Available upon request

£482.22

Expansion Module

Allows for additional readers and associated door/gate hardware using a two conductor connection (RS-485)

Currency:  GBP | USD | EUR
The EXP-1000 is compatible with both the SPX-7400, SPX-7200 and older SPX-55XX series

Reader expansion module - RS-485 for SPX-7400, SPX-7200, SPX-55XX products Supports reader and 2 relays with LED, door hardware and associated I/O. 8 - 16 VDC required. Durable aluminum housing - Overall dimension 4.25″ x 3 x .75″ (approx). Only compatible with Wiegand readers. Not fully compatible keypad readers.

EXP-1000

Reader expansion module - RS-485 for SPX-7400, SPX-7200, SPX-55XX products Supports reader and 2 relays with LED, door hardware and associated I/O. 8 - 16 VDC required. Durable aluminum housing - Overall dimension 4.25″ x 3 x .75″ (approx). Only compatible with Wiegand readers. Not fully compatible keypad readers.

£225.56

The EXP-2000 is compatible with both the SPX-5631 and SPX-5641.

Reader expansion modules - RS-485 for SPX-7400, SPX-7200, SPX-56XX products. Includes remote and central units. Supports reader and 2 relays with LED, door hardware and associated I/O. 8 - 16 VDC required. Durable aluminum housing - Overall dimension 4.25″ x 3″ x .75″ (approx).

EXP-2000

Reader expansion modules - RS-485 for SPX-7400, SPX-7200, SPX-56XX products. Includes remote and central units. Supports reader and 2 relays with LED, door hardware and associated I/O. 8 - 16 VDC required. Durable aluminum housing - Overall dimension 4.25″ x 3″ x .75″ (approx).

£435.56

About Windmill Computing |  Contact Us |  Submit a Return |  Sitemap |  Terms & Conditions |  Cookie Policy

© 2008-2021 Windmill Computing Limited / Registered in England No. 03167398